Woodworking Hand Tools – Select the Right Carpentry Tools
Carpentry hand tools are a necessity if you are thinking about getting into woodworking. Whether cabinetry, furniture making, or just hobby projects, there are a few basic carpentry hand tools you will need. Stanley hand tools are favored because they offer such a wide variety of woodworking tools, for many different jobs. A circular saw is a common carpentry hand tool that demands respect for safety:
General Tips on Circular Saw Safety and Use:
- Always wear safety glasses or a face shield. – Wear a respirator or dust mask. – Wear hearing protection to avoid excess noise. – Check the retracting lower blade guard. – Ensure that the blade is sharp. – Check the saw for proper blade rotation and depth while the saw is unplugged, (the lowest tooth should not extend more than about 0.3 cm or 1/8″ beneath the wood). – Keep all cords clear of cutting area. – Circular saws are designed for right-hand operation, be careful when using left-handed, and always use both hands when operating the saw. One hand should be on the trigger switch and the other on the front knob. – Always be sure the power is unplugged when not in use, especially if changing blades. Stanley hand tools also include other power tools such as drills, electric screwdrivers, grinders, sanders, jigsaws, miter saws, and other carpentry hand tools for special projects. These safety tips apply to any carpentry hand tools, whether Stanley hand tools, or any of the other popular brands:
Power Tool Safety Tips:
- Perform maintenance regularly as needed. – Use the right tool for the job and inspect before using them. – Operate according to manufacturers’ instructions – Use personal protective equipment like steel mesh gloves for cutting and safety glasses, or respirator masks. – Use guards that come with the power tool and use them as intended. – Disconnect power tools when not in use. Never mess with a power tool that is plugged in to change blades, or anything else. – Don’t hold the switch button while plugged-in, to carry. – Keep tools sharp and clean, a sharp blade cuts better and is safer. – Remove damaged cords and discard them. – Do not carry, hoist or lower power tools by their cords. – Don’t pull the cord to disconnect it from an outlet, simply unplug it. – Keep cords away from heat, oil and sharp edges, and especially make sure it is not in the path of what you are cutting.
Woodworking As a Hobby Can Seem to Be Overwhelming:
When you first start woodworking, it can seem overwhelming to assemble all that you are going to need. When it comes to carpentry hand tools, it is better to save for a good quality power tool, like Stanley hand tools, than to buy a cheap, off-name brand. Your carpentry hand tools are an investment that will last you for many years, and Stanley hand tools come with a warranty.
Buying Great Hand tools:
Buying great hand tools is easy, if you choose a reputable manufacturer, and Stanley discount tools are a leading brand for carpentry hand tools. The main thing is to accumulate your carpentry hand tools as you need them for individual projects.
Free WP Autoposter Plugins
How To Use Hand Tools Safely
You know Uncle Will: the poster boy for Yankee Ingenuity. He’s the guy who can solve any household problem with little more than a hammer and screwdriver.
One day Will used a screwdriver instead of a pry bar to rip boards off an old deck. When the screwdriver snapped under the strain, he fell and broke his two front teeth. That’s genius?
There is a right way and a wrong way to use hand tools, but a lot of people don’t seem to know it. In fact, according to the U.S. Consumer Product Safety Commission, each year more than 100,000 injuries require hospital treatment due to misuse of hand tools.
First Steps To A Quality Job
* Buy the best tool you can afford. Cheap tools are more likely to break, and more difficult to use. Buy several versions or sizes of the same tool to assure you have the right tool for the right job.
* Use a hand tool for the job it was manufactured to perform.
* Inspect tools for cracks, chips, mushrooming, and wear. Discard damaged tools promptly.
* Be sure handles are fixed firmly into a tool’s working end.
* Plan your job before you start.
* Check for hidden hazards, e.g., electric wires in a wall.
* Shut the current off when working near electricity.
* Organize the tools in a toolbox.
* Position your body securely while working with the tool. Wear eye protection.
* Concentrate! No matter how trivial the task seems.
Striking And Struck Tools
* Wear safety goggles any time you’re using one of these tools.
* A hammer head should be at least 3/8″ larger in diameter than the striking surface of a chisel, punch, wedge or other struck tools.
* Strike a hammer with the face parallel to the surface being struck. Glancing, off-center blows can throw dangerous splinters into the air.
* Use the right hammer for the job.
* Do not use one hammer to strike another hammer or a hatchet.
* Never use a striking tool with a loose or damaged handle.
* Pull nails or pry wood away from your face.
* Sharpen struck tools before use. Aim the blow or cut away from your body.
Screwdrivers
* The blade tip should fit a slotted screw, without hanging over.
* For many jobs, you’ll need to drill a hole first.
* Do not strike a screwdriver handle with a hammer. It could splinter and shatter.
* Never use the handle as a striking tool.
* Do not use them as pry bars, scrapers, lid removers, punches or chisels.
* Don’t hold work in one hand while using a screwdriver in the other. If the blade slips, you could get hurt.
* Screws are designed to be driven with the proper type of screwdriver. If you fail to take the time to match the screw with the screwdriver, the tool’s blade can slip out of the screw’s slot, resulting in an injury.
* Use insulated screwdrivers when working around electricity, but also turn off the power.
Wrenches
* For better control, pull the wrench toward you; don’t push it away from you. On high-torque jobs, stand firmly.
* Replace wrenches when the teeth become marred or worn.
* Do not substitute pliers for work a wrench should do.
* Never hammer with a wrench.
* Never put your face or head level with a wrench handle.
* Never use a handle extender while turning a wrench. Switch to a wrench with a longer handle or one designed to withstand more force. Homemade handle extenders can slip off and break.
* Use a box or socket wrench to free a tight or frozen nut.
* Make sure the wrench fits a nut or bolt exactly. Limit your use of adjustable wrenches.
Cordless Tools
* Read and thoroughly understand the instruction manual.
* Do not operate cordless tools in or near flammable liquids, or in explosive atmospheres.
* Keep the tool and the recharging unit in an area not accessible to children.
* Remove batteries or lock the switch in its “OFF” position before changing accessories, adjusting or cleaning the tool.
* When cutting, drilling or driving into walls, floors, or wherever live electrical wires may be encountered, hold the tool only by the insulated gripping surfaces.
* Do not touch the drill bit, blade or cutter immediately after operation. It may be extremely hot.
spanish mortgages
